Ultimate Flexibility
16 hardware configurations. Control Point comes in white or black housing and has two versions of buttons, with or without fan control. Available with a set of temperature, CO2, and humidity sensors in different configurations. The CP-HC version is equipped with a temperature, humidity, and CO2 sensors.

Open Customization Over Network
Not only default values like temperature can be displayed but also alarms, blinds, and lightning thanks to the open network interface.

Multiprotocol Integration
Factory-equipped with the two most popular open-communication protocols, Modbus and BACnet.

Plug & Play Comfort Management Solutions
Combined with iSMA CONTROLLI zone controllers, it is ready to be useg out of the box, reducing engineering costs.

Seamless Configuration
Control Point offers effortless configuration using network protocols or free-of-charge software using built-in USB-C port.

Technical Specification

Hardware Specification
Built-in 2.6” LCD display with backlight
Four buttons for fan control, occupancy, and temperature setpoint
RS485 interface
USB type C interface
DIP switch for configuration
Flush wall box 60 mm, US 1-gang electrical outlet box

Temperature Sensor
Range: 0-50°C
Accuracy: +/- 0.5°C
Resolution: +/- 0.1°C

Humidity Sensor 
Range: 0-100% RH
Accuracy: +/- 2% RH in range 10-90% RH
Resolution: +/- 1% RH

CO2 Sensor
Range: 400-2000 ppm
Accuracy: 50 ppm + 5% of reading

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software: iC Tool & iSMA Configurator

Power Supply
24 V AC/DC ± 20%